QM: Printing the Sample-Drawing Instruction and Inspection Instruction

Description

You must modify the system as described below if you use the:

You must make the system modifications in both of the above cases.
If you do not, the following problems may arise:

You must make these modifications so you can make the enhance the print programs as described below and to increase the stability of the system.

For more information about the print control, refer to the Implementation Guide for Quality Management.

System modifications

Sample-drawing instruction

Prerequisite 1:

Required system modifications:
In Customizing for the print control, replace the existing print program RQDSES10 with the new print program RQDSES20 (see print programs). Also, replace the existing form PROBEZIEHANWEIS with the new form QM_SAMPLE_INSTR (see forms).

Prerequisite 2:

Required system modification
If your existing enhancements can be replaced by the new functions in the standard system (see below), follow the instructions described under 'Prerequisite 1'.
If you still need your existing enhancements, reimplement them after you have installed the new print program RQDSES20 and new form QM_SAMPLE_INSTR. Refer to the table below for a list of the necessary technical changes.

Inspection Instruction

Prerequisite

Required system modification
Modify your print program and implement the changes that were made in the standard program. Refer to the table below for a listing of the necessary technical changes.

Note
If you currently use print program RQEEAS10 (with form PRUEFANWEISUNG), SAP recommends that you use the improved program RQEEAS20 (with form INSP_INSTRUCTION) instead.

Functional enhancements in the sample-drawing instruction

The sample-drawing instruction has the following new features:

If you use the new QM functions in Release 4.0 for Sample Management , the sample-drawing instruction contains the following information for the inspection lot:

For inspection lots created on the basis of maintenance orders (see Test Equipment Management), the sample-drawing instruction contains the following information:

Functional enhancements in the inspection instruction

Enhancements were made for print program RQEEAS20 and form INSP_INSTRUCTION only.

The inspection instruction has the following new features:

Technical description of the changes made in Release 4.0

Sample drawing instruction

Standard < 4.0 Standard 4.0
Report name RQDSES10 RQDSES20
Interface prlst_tmp prlst_tmp
g_qapro_tab lsproben
g_qamv_tab qamvtab
qapotab qapotab
qasvtab qasvtab
i_qals i_qals
i_first_print i_first_print
i_print_message i_print_message
Memory Without Memory ID Memory-ID 'QM_PRT01'
Form PROBEZIEHANWEIS QM_SAMPLE_INSTR
Text elements HEADER Expanded to include
production order number
SKIP No change to content;
formal changes
REPRINT No change to content;
formal changes
WITHOUT_PLAN No change to content;
formal changes
PLAN_WITHOUT_CHARACTERISTICS No change to content;
Formale changes
SAMPLE_DRAWING_TEXT_HEADLINE No change to content;
Formal changes
SAMPLE_DRAWING_TEXT SAMPLE_DRAWING_TEXT_INFO
No change to content;
formal changes
LINE Unchanged
SAMPLE_INFO_HEADLINE Changed; expanded
to include insp. operation
SAMPLE_INFO Changed; expanded
to include insp. operation
SIZE_TO_BIG No change to content;
formal changes
INSPECTION_STATION_HEADLINE Changed; expanded
to include physiscal sample
INSPECTION_STATION_INFO Changed; expanded to
include physical sample

New text elements in the standard system (4.0) for Sample Management:

New text elements in the standard system (4.0) for inspection lots created on the basis of maintenance orders:

The form documentation for Release 4.0 is also new.

Explanation of the interface changes in the sample-drawing instruction:

Inspection instruction

Standard < 4.0 Standard 4.0
Interface prlst_tmp prlst_tmp
qamvtab qapotab
qapotab qamvtab
qasvtab qasvtab
prttab
i_qals i_qals
i_first_print i_first_print
i_print_message i_print_message
Memory without memory ID Memory ID 'QM_PRT02'

Explanations for interface changes in the inspection instruction:

All interface data is transferred via memory ID 'QM_PRT02'.
Table PRTTAB contains the production resources and tools for the inspection lots created in Release 4.0, which must be used in the inspection.