Development and Production System


When you configure a 2 system group, you can specify which R/3 System is the development system and which the production system. The transport route is generated automatically.


To configure the transport route for a development and production system, proceed as follows:

If you use the Standard configuration function, all previous configurations for all R/3 Systems are replaced by the standard settings.

Standard transport layers and transport routes that already exist are deleted.

Transport layers, development classes and objects that already exist are kept.

  1. In the hierarchical list editor, choose Configuration ® Standard config.
  2. The Change Transport Routes dialog box appears.

  3. Select Test and production system and choose Continue.
  4. Enter the names of your R/3 Systems and choose Continue.
  5. Your R/3 Systems and their transport routes are displayed in the hierarchical list editor under Transport routes.

  6. Save the configuration.
  7. Save the configuration. To check the transport route configuration, choose Configuration ® Check ® All systems.
  8. To distribute the transport route configuration to all R/3 Systems involved, choose Configuration ® Distribute.
  9. To activate the configuration, choose Configuration ® Activate ® In all systems.

When doing so, you must enter your user ID and password in all R/3 Systems that are to be changed.


The development and production system have been configured and are connected to each other by a transport route (consolidation route).

The transport route configuration was distributed to and activated in all R/3 Systems involved.